When the piano strings were old, rusty and rotten replacement is necessary to correctly configure the piano A440 pitch and to maintain optimum sound quality piano. Piano Restringing three stages involving the removal of dampers and strings, scaling, and overlapping lines, the last step is the installation of new contacts and lines.

Damper must be removed to facilitate removal of lines and to prevent damage. Do not forget to measure the height of the valve train as you may need it as a starting point when you reinstall. When you delete a row starts, he proposed to weaken the various sections of the scale, since the mid-section in order to prevent undue tension in one area of ​​the plate. Make sure to wear protective goggles and gloves as a safety line wire is very sharp and regularly break, how do you relieve stress. If you plan to replace the pin block, line pins can be removed by an electric drill.

Take the bass strings in order and place them on a wire loop, they will be needed in order to duplicate the new lines are wound. Make sure to specify any one connected line and Mark any changes to the hitch pins. To verify that the sensor and save your own high-frequency wire will need to assess the size of the string wires on the line if you do not have line pattern for your piano model. In most cases you will need to be replaced in the string felt, as they usually wear, and dust ridden. For pictures, to keep everyone in line feel like you need to cut a new felt from old felt to insure your piano will maintain its originality and beauty.

The decision must be made in respect of replacement contact block, if you keep the old block PIN-code over the size of the contacts must be used when re-installed. Unit will need to be supported to prevent damage when the new contacts are in. Allow 3:57 round string on a reel PIN-code, to ensure the stability of adjustment. To prevent the weakening of the block is desirable to coil a couple of rounds of a string on his finger before driving it in. After a string set, use the string stretcher will contribute to stability in the preferences.

Restringing piano is a complex and laborious task. Experience necessary to ensure accurate coil made for a uniform work. If you have no experience, it is advisable to seek the assistance of experienced rebuilder piano, who has experience in restringing and restore your type of piano.